Personal tools
     DOCUMENTATION

Appliance Administration:Installation Process

From rPath Wiki

Jump to: navigation, search
Appliance Administration --> Installation

Booting the Install Media

You can choose to install in a graphical or text mode
Enlarge
You can choose to install in a graphical or text mode

The following example graphical installation provides instruction for the process of installing an appliance from an ISO image (such as a CD, DVD, or network-accessible ISO) built in rBuilder. Appliance builders may make modifications to the install process that shorten or extend the steps provided here.

After successfully booting to the installation media, the boot menu offers selections of graphical installation mode or text installation mode.

  • To use the graphical installer, press ENTER.
  • To install in text mode, type linux text and press ENTER.
Image:Bulbgraph.png   If you do not make a selection, the system will automatically start the graphical installation mode.

The boot loader screen provides help through function keys, such as F3 and F5. Press these keys if you need to load corresponding help screens. When you see a boot loader screen similar to that shown in the figure at right, press ENTER to continue the graphical installation.


From here you may wish to:

Participate in the rPath Community | Contribute to rPath Wiki | Report an issue to rPath

Retrieved from "http://wiki.rpath.com/wiki/Appliance_Administration:Installation_Process"